[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Pipe:Indoor Pipe Fluid against Ambient Heat Transfer Rate [1 Attachment]





Dear forum,


I am asking myselves questions about the results I obtain with a Pipe:Indoor object modeling a distribution pipe in a basement.

- Why is the Pipe Fluid Heat Transfer Rate in average significantly higher than the Pipe Ambient Heat Transfer Rate?

Apart from transient effects due the thermal capacitance of fluid and pipe, should not the thermal power coming in at the inlet be roughly equal to the sum of the thermal power coming out at the outlet and of the heat loss to the environment?

- The pipe fluid heat transfer rate exhibits important peaks for days where the mass flow rate through the pipe alternates from null to positive values.

Sure, it also corresponds to the times when the inlet-outlet temperature difference is at its greatest.

Do such important peaks have a physical meaning, in the sense of a reheating of pipe wall?


Thank you for your thoughts on the subject,


Robert




__._,_.___
View attachments on the web

Posted by: robertogrilloait@xxxxxxxxx


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___
Attachment not found:
D:\Eudora\Attach\indoor-pipe-results.PNG