[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Modeling an industrial oven
Dear forum,
I have a room on the roof of a building that is well insulated, trying to maintain 350 deg. F. There is no cooling load, but for the warm-up I am getting this severe error:
** Severe ** Temperature (low) out of bounds [-128.21]
for zone="PC1_OVEN", for
surface="PC1OVEN:PC1OVEN_WALL_3_0_0"
I cannot find where the source of this error is located, or why it would be generated. The natural winter conditions come nowhere close to this, and as I said before, there is no cooling loads in this space. Any suggestions?
__._,_.___
Posted by: mitchell@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___