[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] concrete core activation



But that is still meaning setting up a plant, branchlists, connections, etc. It's not a fast standalone equipment for first tests.

On 21 Sep 2015 09:31, "Julien Marrec julien.marrec@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

Hi,

I'm a little bit behind so it's probably too late, but in E+ you could use a PlantComponent:TemperatureSource.
Note that this object will be  available in OpenStudio GUI as of 1.9.0 which should be out (very?) soon. In the meantime you could use the release candidate.

Best,
Julien

--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13

LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr

2015-08-20 7:36 GMT+02:00 Jean Marais jeannieboef@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:
 

Not at the minute...as far as I know you have to model the whole system. Because 3rd party GUI's like designbuilder make this so easy now, it's unlikely that e+ will develop the solution you propose. Perhaps an argument of increased simulation speed could be made.

On 19 Aug 2015 4:48 pm, "ger.schweiger@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

Hey,

I have created the object: InternalSource, LowTemperatureRadiant:VariableFlow and a Thermostat.

Do I need to implement the whole HVAC System (PlantLoop, etc.)? I am new to EnergyPlus and OpenStudio and I tried it in OS, but it is not that easy - besides, we don't need the whole HVAC in our model, just concrete core activation incl. measured supply temperature.

Is there a possibility, to model something like a "ideal source/sink" for the LowtemperatureRadiant + Construction:InternalSource - without the wohle HVAC system? And if so, how would be a proper way to do that (inside OS would be easier for the start).

Thank you very much





__._,_.___
Posted by: Jean Marais <jeannieboef@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Visit Your Group
Yahoo! Groups
• Privacy • Unsubscribe • Terms of Use

__,_._,___