[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Digest Number 4983 [2 Attachments]
I will be out of the office on leave until the 4th October. If you need to urgently get hold of me please send me a text message or call 00447503775874.
On 26 Sep 2015, at 10:54, EnergyPlus_Support@xxxxxxxxxxxxxxx wrote:
EnergyPlus Support Group
8 Messages
Digest #4983
1a
Importing external datas into by giolince
1b
Re: Importing external datas into by "Jim Dirkes" jvd2pe
2a
Is there a way to convert the output meter units from Joule to kWh? by antoniomalcangi
2b
Re: Is there a way to convert the output meter units from Joule to k by "Jim Dirkes" jvd2pe
2c
Re: Is there a way to convert the output meter units from Joule to k by "antonio malcangi" antoniomalcangi
2d
Re: Is there a way to convert the output meter units from Joule to k by "Julien Marrec"
2e
Re: Is there a way to convert the output meter units from Joule to k by "Jason Glazer" jglazerus
3
Survey on occupant modeling assumptions in building simulation by liambrn
Messages
1a
Importing external datas into
Fri Sep 25, 2015 5:20 am (PDT) . Posted by:
giolince
Hello everybody,
I would like to know if it is possible to import the values of a parameter through an external file. In my case I would like to make the "Slat beam solar transmittance" vary (with a csv-file for example). Is this possible ? If so, how did you do it ?
Thanks,
Regards.
Johann
Reply to sender . Reply to group . Reply via Web Post . All Messages (2) . Top ^
1b
Re: Importing external datas into
Fri Sep 25, 2015 5:34 am (PDT) . Posted by:
"Jim Dirkes" jvd2pe
Johann,
Take a look at the Schedule:File object. It allows a specific value for
each hour of the year.
On Fri, Sep 25, 2015 at 2:27 AM, giolince@xxxxxxxxx [EnergyPlus_Support] <
EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
>
>
> Hello everybody,
>
> I would like to know if it is possible to import the values of a parameter
> through an external file. In my case I would like to make the "Slat beam
> solar transmittance" vary (with a csv-file for example). Is this possible ?
> If so, how did you do it ?
>
> Thanks,
>
> Regards.
>
> Johann
>
>
--
James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504
Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website <http://buildingperformanceteamcom>l LinkedIn
<https://www.linkedin.com/pub/jim-dirkes/7/444/413>
??happiness is the joy produced in us by truth. To be truly happy means
coming to know how things really are, experiencing ?reality in its ultimate
root?
What matters more to one?s happiness than getting more freedom and power is
the end toward which we order whatever freedom and power we have. Unless we
order ourselves to the truth, more freedom and more power will bring only
more unhappiness, examples of which abound.
Reply to sender . Reply to group . Reply via Web Post . All Messages (2) . Top ^
2a
Is there a way to convert the output meter units from Joule to kWh?
Fri Sep 25, 2015 6:53 am (PDT) . Posted by:
antoniomalcangi
hi guys
I have set a model in OpenStudio and now I am cheking the idf file in EnergyPlus.
I would like to know which are the reesults for the follow Output Meters:
InteriorLights:Electricity,Annual;
Heating:DistrictHeating,Annual;
Cooling:DistrictCooling,Annual;
All the results are in Joule, but I would like to see them in kWh.
Is there anyway to convert these units?
Could you help me?
Any suggestion is very appreciate.
A.
Reply to sender . Reply to group . Reply via Web Post . All Messages (5) . Top ^
2b
Re: Is there a way to convert the output meter units from Joule to k
Fri Sep 25, 2015 7:10 am (PDT) . Posted by:
"Jim Dirkes" jvd2pe
Divide by 3,600,000 (I don't know how to make the output do so
automatically)
On Fri, Sep 25, 2015 at 9:53 AM, antoniomalcangi@xxxxxxxxx
[EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
>
>
> hi guys
>
>
> I have set a model in OpenStudio and now I am cheking the idf file in
> EnergyPlus.
>
> I would like to know which are the reesults for the follow Output Meters:
>
>
> InteriorLights:Electricity,Annual;
>
> Heating:DistrictHeating,Annual;
>
> Cooling:DistrictCooling,Annual;
>
>
>
> All the results are in Joule, but I would like to see them in kWh.
>
>
> Is there anyway to convert these units?
>
> Could you help me?
>
>
> Any suggestion is very appreciate.
>
>
> A.
>
>
>
--
James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504
Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website <http://buildingperformanceteamcom>l LinkedIn
<https://www.linkedin.com/pub/jim-dirkes/7/444/413>
??happiness is the joy produced in us by truth. To be truly happy means
coming to know how things really are, experiencing ?reality in its ultimate
root?
What matters more to one?s happiness than getting more freedom and power is
the end toward which we order whatever freedom and power we have. Unless we
order ourselves to the truth, more freedom and more power will bring only
more unhappiness, examples of which abound.
Reply to sender . Reply to group . Reply via Web Post . All Messages (5) . Top ^
2c
Re: Is there a way to convert the output meter units from Joule to k
Fri Sep 25, 2015 7:11 am (PDT) . Posted by:
"antonio malcangi" antoniomalcangi
thank you Jim
but I mean in an automatic way.
Sent with MailTrack
<https://mailtrack.io/install?source=signature&lang=en&referral=antoniomalcangi@xxxxxxxxx&idSignature=22>
On 25 September 2015 at 16:10, Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
[EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
>
>
> Divide by 3,600,000 (I don't know how to make the output do so
> automatically)
>
> On Fri, Sep 25, 2015 at 9:53 AM, antoniomalcangi@xxxxxxxxx
> [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
>
>>
>>
>> hi guys
>>
>>
>> I have set a model in OpenStudio and now I am cheking the idf file in
>> EnergyPlus.
>>
>> I would like to know which are the reesults for the follow Output Meters:
>>
>>
>> InteriorLights:Electricity,Annual;
>>
>> Heating:DistrictHeating,Annual;
>>
>> Cooling:DistrictCooling,Annual;
>>
>>
>>
>> All the results are in Joule, but I would like to see them in kWh.
>>
>>
>> Is there anyway to convert these units?
>>
>> Could you help me?
>>
>>
>> Any suggestion is very appreciate.
>>
>>
>> A.
>>
>>
>
>
> --
>
> James V Dirkes II, PE, BEMP, LEED AP
> CEO/President
> The Building Performance Team Inc.
> 1631 Acacia Dr, GR, Mi 49504
>
> Direct: 616.450.8653
> jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> Website <http://buildingperformanceteamcom>l LinkedIn
> <https://www.linkedin.com/pub/jim-dirkes/7/444/413>
>
> ??happiness is the joy produced in us by truth. To be truly happy means
> coming to know how things really are, experiencing ?reality in its ultimate
> root?
> What matters more to one?s happiness than getting more freedom and power
> is the end toward which we order whatever freedom and power we have. Unless
> we order ourselves to the truth, more freedom and more power will bring
> only more unhappiness, examples of which abound.
>
>
>
Reply to sender . Reply to group . Reply via Web Post . All Messages (5) . Top ^
2d
Re: Is there a way to convert the output meter units from Joule to k
Fri Sep 25, 2015 7:57 am (PDT) . Posted by:
"Julien Marrec"
For the Eplusout.html, you can switch with output:Table:Style object and
set Unit Conversion to JtoKW (or any of the others including InchPound).
For the Output:Variable stuff, there's no option that I know of that will
do it for you... You'll have divide by 3600000 as Jim pointed out. If you
want "automatic", you'll have to write a preprocessing script;
--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13
LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
<http://www.linkedin.com/in/julienmarrec>
2015-09-25 16:11 GMT+02:00 antonio malcangi antoniomalcangi@xxxxxxxxx
[EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>:
>
>
> thank you Jim
> but I mean in an automatic way.
>
>
>
>
> Sent with MailTrack
> <https://mailtrack.io/install?source=signature&lang=en&referral=antoniomalcangi@xxxxxxxxx&idSignature=22>
>
> On 25 September 2015 at 16:10, Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
>
>>
>>
>> Divide by 3,600,000 (I don't know how to make the output do so
>> automatically)
>>
>> On Fri, Sep 25, 2015 at 9:53 AM, antoniomalcangi@xxxxxxxxx
>> [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
>>
>>>
>>>
>>> hi guys
>>>
>>>
>>> I have set a model in OpenStudio and now I am cheking the idf file in
>>> EnergyPlus.
>>>
>>> I would like to know which are the reesults for the follow Output Meters:
>>>
>>>
>>> InteriorLights:Electricity,Annual;
>>>
>>> Heating:DistrictHeating,Annual;
>>>
>>> Cooling:DistrictCooling,Annual;
>>>
>>>
>>>
>>> All the results are in Joule, but I would like to see them in kWh.
>>>
>>>
>>> Is there anyway to convert these units?
>>>
>>> Could you help me?
>>>
>>>
>>> Any suggestion is very appreciate.
>>>
>>>
>>> A.
>>>
>>>
>>
>>
>> --
>>
>> James V Dirkes II, PE, BEMP, LEED AP
>> CEO/President
>> The Building Performance Team Inc.
>> 1631 Acacia Dr, GR, Mi 49504
>>
>> Direct: 616.450.8653
>> jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
>>
>> Website <http://buildingperformanceteamcom>l LinkedIn
>> <https://www.linkedin.com/pub/jim-dirkes/7/444/413>
>>
>> ??happiness is the joy produced in us by truth. To be truly happy means
>> coming to know how things really are, experiencing ?reality in its ultimate
>> root?
>> What matters more to one?s happiness than getting more freedom and power
>> is the end toward which we order whatever freedom and power we have. Unless
>> we order ourselves to the truth, more freedom and more power will bring
>> only more unhappiness, examples of which abound.
>>
>>
>
>
Reply to sender . Reply to group . Reply via Web Post . All Messages (5) . Top ^
2e
Re: Is there a way to convert the output meter units from Joule to k
Fri Sep 25, 2015 8:07 am (PDT) . Posted by:
"Jason Glazer" jglazerus
Actually, for the output variable and output meter results,
if you are using EP-Launch, there is an option under VIEW ..
OPTIONS .. MISCELLANEOUS to check called "Convert ESO/MTR to
IP units". This causes the convertESOMTR program to run. The
conversions are all documented in the
\PostProcess\convertESOMTR\convert.txt file.
Jason
On 9/25/2015 9:57 AM, Julien Marrec julien.marrec@xxxxxxxxx
[EnergyPlus_Support] wrote:
>
>
> For the Eplusout.html, you can switch with
> output:Table:Style object and set Unit Conversion to JtoKW
> (or any of the others including InchPound).
>
> For the Output:Variable stuff, there's no option that I
> know of that will do it for you... You'll have divide by
> 3600000 as Jim pointed out. If you want "automatic",
> you'll have to write a preprocessing script;
>
>
>
> --
> Julien Marrec, EBCP, BPI MFBA
> Energy&Sustainability Engineer
> T: +33 6 95 14 42 13
>
> LinkedIn (en) : www.linkedin.com/in/julienmarrec
> <http://www.linkedin.com/in/julienmarrec>
> LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
> <http://www.linkedin.com/in/julienmarrec/fr>
>
> 2015-09-25 16:11 GMT+02:00 antonio malcangi
> antoniomalcangi@xxxxxxxxx
> <mailto:antoniomalcangi@xxxxxxxxx> [EnergyPlus_Support]
> <EnergyPlus_Support@xxxxxxxxxxxxxxx
> <mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx>>:
>
> thank you Jim
> but I mean in an automatic way.
>
>
>
>
> Sent with MailTrack
> <https://mailtrack.io/install?source=signature&lang=en&referral=antoniomalcangi@xxxxxxxxx&idSignature=22>
>
> On 25 September 2015 at 16:10, Jim Dirkes
> jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> <mailto:jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> [EnergyPlus_Support]
> <EnergyPlus_Support@xxxxxxxxxxxxxxx
> <mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx>> wrote:
>
> Divide by 3,600,000 (I don't know how to make the
> output do so automatically)
>
> On Fri, Sep 25, 2015 at 9:53 AM,
> antoniomalcangi@xxxxxxxxx
> <mailto:antoniomalcangi@xxxxxxxxx>
> [EnergyPlus_Support]
> <EnergyPlus_Support@xxxxxxxxxxxxxxx
> <mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx>> wrote:
>
> hi guys
>
>
> I have set a model in OpenStudio and now I am
> cheking the idf file in EnergyPlus.
>
> I would like to know which are the reesults
> for the follow Output Meters:
>
>
> InteriorLights:Electricity,Annual;
>
> Heating:DistrictHeating,Annual;
>
> Cooling:DistrictCooling,Annual;
>
> All the results are in Joule, but I would like
> to see them in kWh.
>
>
> Is there anyway to convert these units?
>
> Could you help me?
>
>
> Any suggestion is very appreciate.
>
>
> A.
>
>
>
>
> --
>
> James V Dirkes II, PE, BEMP, LEED AP
> CEO/President
> The Building Performance Team Inc.
> 1631 Acacia Dr, GR, Mi 49504
>
> Direct: 616.450.8653 <tel:616.450.8653>
> jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> <mailto:jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
>
> Website <http://buildingperformanceteamcom>l
> LinkedIn
> <https://www.linkedin.com/pub/jim-dirkes/7/444/413>
>
> *//*
>
> ??happiness is the joy produced in us by truth. To
> be truly happy means coming to know how things
> really are, experiencing ?reality in its ultimate
> root?
> What matters more to one?s happiness than getting
> more freedom and power is the end toward which we
> order whatever freedom and power we have. Unless
> we order ourselves to the truth, more freedom and
> more power will bring only more unhappiness,
> examples of which abound.
>
>
>
>
>
>
--
Jason Glazer, P.E., GARD Analytics, 90.1 ECB chair
Admin for onebuilding.org building performance mailing lists
Reply to sender . Reply to group . Reply via Web Post . All Messages (5) . Top ^
3
Survey on occupant modeling assumptions in building simulation
Fri Sep 25, 2015 10:21 am (PDT) . Posted by:
liambrn
Dear group:
As part of IEA EBC Annex 66, a 100-expert/4-year research project on occupant modelling, I'm leading a survey to better understand the assumptions and attitudes that building simulation users have about occupants. The results will be highly useful to software developers and researchers.
If you can spare 15 minutes, I'd be greatly appreciative if you could fill out the online survey. To recognize your effort, participants have a chance to win some great prizes and will also have access to the aggregated/anonymous results.
Here is the link: http://goo.gl/forms/sbvCS6z5Zw http://ibpsa.us11.list-manage.com/track/click?u=ac8b59e3f00c31d1048d7c8bd&id=ac281ac3f5&e=35fbf7d889
Many thanks,
Liam O'Brien
Reply to sender . Reply to group . Reply via Web Post . All Messages (1) . Top ^
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
VISIT YOUR GROUP New Members 6
? Privacy ? Unsubscribe ? Terms of Use
Attachment not found:
D:\Eudora\Attach\logo-groups-137x152.png
Attachment not found:
D:\Eudora\Attach\logo-groups-transparent-180x402.png