[EnergyPlus_Support] Autosized DOAS coil doesn't work

["cnkhanh1986@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Hello,

I get fatal error when try so setup DOAS system. This error was confirmed at Fully autosized DX coil should not fail with a fatal SHR error · Issue #4853 · NREL/EnergyPlus. I would like to know how to bypass this error in my case please see my case in here : DOASDXCOIL_wADPBFMethodDCV5outdoortest1DOAS.idf at the moment. In my case the DX coil should get 36 kW at peak condition however due to DX evaporator flow rate limit : < 13 kW.

T

			DOASDXCOIL_wADPBFMethodDCV5outdoortest1DOAS.idf Shared with Dropbox
			View on www.dropbox.com	Preview by Yahoo

 

			Fully autosized DX coil should not fail with a fatal SHR... User file failing with this error: ** Severe ** Coil:Cooling:DX:SingleSpeed "CORRIDOR_FLR_3_DXCOIL" -- coil bypass factor calculation did not conver...
			View on github.com	Preview by Yahoo

 

__._,_.___

---

Posted by: cnkhanh1986@xxxxxxxxx

---

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 7

• Privacy • Unsubscribe • Terms of Use

__,_._,___