[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Use material with given U value





thanks!!


On Fri, Nov 27, 2015 at 11:19 AM, Javed Iqbal eee.javed@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

There is a data set of typical construction material that comes along with EnergyPlus Installation. You can open "ASHRAE_2005_HOF_Materials.idf" in IDF editor or Text Pad to refer this. See below

Inline image 1

On Fri, Nov 27, 2015 at 1:25 PM, Ipek Gursel Dino ipekgursel@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

Hello all,
I would like to use a wall material that has a given U value (0,5). I know that EP calculates this value by means of roughness, thickness, conductivity, density and specific heat. However, I do not have these data available, and want to assign the U value myself. Is there a way to do this?

thanks!
Ipek 




--


Javed Iqbal, LEED AP, CEA
Sr. Energy Analyst 








__._,_.___

Posted by: Ipek Gursel Dino <ipekgursel@xxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___