[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Basic principle question
Hi ,
I know that for a cooling water coil to make air output temperature at certain setpoint , it will either cool it sensibly or cool and dehumidify it to reach that setpoint .
Therefore there is one humidity ratio where the coil would cool only sensibly (constant w) and a point of any other humidity ratio above that would need to be cooled and dehumidified to reach such temperature setpoint.
The strange thing that happened here is that in excel sheet results some points show that the coil have cooled and reached setpoint sensibly although those points are of different humidity ratios and all above the line of setpoint temp at 100% RH .
Can anyone explain that ?
__._,_.___
Posted by: alyelhefni@xxxxxxxxx
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___