I second that question.
If you only want to reduce the consumption of the floor (if they are billed on chilled water meters or example) then use a district heating and/or chilling meter.
If you need to do that for leed, I believe you have to model the entire building (don't quote me on that I'm not 100% sure)...
Cheers,
Julien
Envoyé de mon iPhone
Envoyé de mon iPhone
Le 5 déc. 2015 à 18:51, "MN mneves32@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> a écrit :
What are the objectives of your simulation?
From: Ivan Mezzacapa ivan_slip@xxxxxxxxxxx [EnergyPlus_Support]
Sent: 12/4/2015 21:52
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Floor HVAC Simulation
Hello, I am simulating the floor of a building , however, this floor uses a fan coil . How can I make the simulation only on the floor , when the COP is related to chiller building? (simulation according to ashrae 90.1)Thanks!
Tecg. Ivan Mezzacapa
P??s Graduado em Engenharia de Produ????o
Projetos de Ar Condicionado - Consultoria em Efici??ncia Energ??tica - Simula????o Energ??tica
LinkedIN: http://www.linkedin.com/in/ivanmezzacapaCelular: (11) 99963-9326
__._,_.___
Posted by: Julien Marrec <julien.marrec@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___