[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Re: RH > 100%
Appears to be a problem in the averaging scheme that
EnergyPlus uses to determine the "current" values.
I have reported it to the EnergyPlus team.
At 09:14 PM 12/5/2015, alyelhefni@xxxxxxxxx [EnergyPlus_Support]
wrote:
Here is an attached screen shot
for the output having this problem
It happens when I run a minute by minute simulation and RH% starts to
exceed 100% starting from the point 12/26 5:16 and goes on increasing for
the following points . Then it starts to decrease again below 100
.
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___