[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] EnergymanagementSystem: WarmupFlag





Hi All,

I have been trying to set up the built-in variable "WarmupFlag" in the EnergyManagementSystem, I also found a discussion from a few years ago, but it didnt work for me.(https://groups.yahoo.com/neo/groups/EnergyPlus_Support/conversations/messages/19016)

If i take the above mentioned example: what needs to be set in the EMS for the warmupflag to mark the WU-phase?

EnergyManagementSystem:ProgramCallingManager,

myCalc3,             !- Name

BeginNewEnvironment,  !- EnergyPlus Model Calling Point

Calc_warmup;    !- Progam Name 1

 

EnergyManagementSystem:Program,

Calc_warmup,    !- Name

Set flag=1;           !- Program Line 1

 

EnergyManagementSystem:ProgramCallingManager,

myCalc4,             !-Name

AfterNewEnvirontWarmUpIsComplete,    !-EnergyPlus Model Calling Point

Calc_after_warmup;        !- Program Name 1


EnergyManagementSystem:Program,

Calc_after_warmup,        !-Name

Set flag=0            !- Program Line1



Thank you for your help,

Christiane




__._,_.___

Posted by: chrizzy_delacruz@xxxxxxxx


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___