[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] Re: representative days for simulation
The files I referred to have the monthly options from ASHRAE
HOF.
They may be titled somewhat differently?
Design Conditions Definitions (Monthly-All Regions) for all
ASHRA...
The ASHRAE Handbook of Fundamentals specifies design conditions for 5500+
locations. These zip files have "macro defined" sets for each
in EnergyPlus V7.1 (and later) format. Monthly design conditions for dry
bulb temperature (with mean coincident wet...
Design Conditions Definitions (Monthly-All Regions) for all
ASHRA...
The ASHRAE Handbook of Fundamentals specifies design conditions for 6400+
locations. These zip files have "macro defined" sets for each
in EnergyPlus V7.1 (and later) format. Monthly design conditions for dry
bulb temperature (with mean coincident wet bu...
Design Conditions Definitions (Monthly-Individual Regions) for
al...
The ASHRAE Handbook of Fundamentals specifies design conditions for 5500+
locations. These zip files have "macro defined" sets for each
in EnergyPlus V7.1 (and later) format. Monthly design conditions for dry
bulb temperature (with mean coincident wet...
Design Conditions Definitions (Monthly-Individual Regions) for
al...
The ASHRAE Handbook of Fundamentals specifies design conditions for 6400+
locations. These zip files have "macro defined" sets for each
in EnergyPlus V7.1 (and later) format. Monthly design conditions for dry
bulb temperature (with mean coincident wet bu...
For example:
Design Conditions Definitions (Monthly-All Regions) for all ASHRAE 2009
Design Condition Locations
Posted by Linda Lawrie on 27 November 2012 07:31 AM
The ASHRAE Handbook of Fundamentals specifies design conditions for 5500+
locations. These zip files have "macro defined" sets for
each in EnergyPlus V7.1 (and later) format.
Monthly design conditions for dry bulb temperature (with mean coincident
wet bulb temperature) and wet bulb temperature (with mean coincident dry
bulb temperature) for .4% and 2% are included.
Several files are included:
2009_DesignDayCityCountry.csv - this is the key to countries,
cities and the key used for the epmacro defines to obtain the data
2009_Monthly_DesignDay_AllRegions.zip - this is a zip of the
following zips:
(the following files are found, individually in the knowledge base
article: Design Conditions Definitions (Monthly-Individual Regions) for
all ASHRAE 2009 Design Condition Locations
2009_Monthly_DesignDay_Region_1_Africa.zip - design day definitions for
WMO Region 1: Africa
2009_Monthly_DesignDay_Region_2_Asia.zip- design day definitions for WMO
Region 2: Asia
2009_Monthly_DesignDay_Region_3_South_America.zip - design day
definitions for WMO Region 3: South America
2009_Monthly_DesignDay_Region_4_North_And_Central_America.zip -
design day definitions for WMO Region 4: North and Central America
2009_Monthly_DesignDay_Region_5_Southwest_Pacific.zip - design day
definitions for WMO Region 5: Southwest Pacific
2009_Monthly_DesignDay_Region_6_Europe.zip - design day definitions for
WMO Region 6: Europe
2009_Monthly_DesignDay_Region_7_Antarctica.zip - design day definitions
for WMO Region 7: Antarctica
Climatic Design Conditions are discussed in the ASHRAE Handbook of
Fundamentals, Chapter 14, 2009 edition.
Monthly Design Conditions (represented in the attachment in EnergyPlus
SizingPeriod:Designday form) and how they are to be used are also
discussed in this chapter.
At 01:48 PM 1/13/2016, 'Jones, Christopher'
Christopher.r.Jones@xxxxxxxxxxxx [EnergyPl wrote:
The file Linda referred to only
includes winter and summer design day information. I donâ??t know where
you could get monthly design day information. Trane Trace uses monthly
design days but I donâ??t believe Trane publishes that information.
Christopher Jones, P.Eng.
Senior Engineer
WSP Canada Inc.
2300 Yonge Street, Suite 2300
Toronto, ON M4P 1E4
T +1 416-644-4226
F +1 416-487-9766
C +1 416-697-0056
www.wspgroup.com
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[
mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
Sent: Wednesday, January 13, 2016 3:30 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: representative days for
simulation
Linda, thanks for the help. Where can I reach this place that you
mentioned? Is it a website?
On Wed, Jan 13, 2016 at 7:15 PM, Linda Lawrie
linda@xxxxxxxxxxxxxx
[EnergyPlus_Support]
<
EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Try here:
Try the helpdesk: View Knowledge Base and look at the Downloads
section.
At 09:50 AM 1/13/2016, Ipek Gursel Dino
ipekgursel@xxxxxxxxx
[EnergyPlus_Support] wrote:
- Where can i fine these days?
- On Wednesday, January 13, 2016, Linda Lawrie
linda@xxxxxxxxxxxxxx
[EnergyPlus_Support]
<
EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Ã?
You could choose the monthly design days for your location.
Not perhaps typical but representative.
At 02:42 AM 1/13/2016, Ipek Gursel Dino
ipekgursel@xxxxxxxxx
[EnergyPlus_Support] wrote:
but which custom dates? how can I select the typical days of a season in
terms of temperature and sun availability?
On Wed, Jan 13, 2016 at 8:59 AM, Jean Marais
jeannieboef@xxxxxxxxx
[EnergyPlus_Support] <
EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Ã??Ã?
simulate for custom days or design days.
2016-01-13 1:26 GMT+01:00 Ipek Gursel Dino
ipekgursel@xxxxxxxxx
[EnergyPlus_Support] <
EnergyPlus_Support@xxxxxxxxxxxxxxx>:
Ã??Ã?
Hi,
I am doing a comparative study that compares a number of buildings with
varying window sizes. I would like to reduce the computation time by
limiting the RunPeriod to only one day per season, 4 in total. what is
the best way to select these days? I am also calculating daylighting, so
any random day runs the risk of being not representative of the whole
season. for example a selected day can be an exceptionally sunny day in
cold winter. any ideas would be greatly appreciated...
Ipek
You are receiving this communication because you are listed as a current
WSP contact. Should you have any questions regarding WSPâ??s electronic
communications policy, please consult our Anti-Spam Commitment
www.wspgroup.com/casl. For any concern or
if you believe you should not be receiving this message, please forward
this message to us at
caslcompliance@xxxxxxxxxxxx so that we can promptly address your
request. This message is intended only for the use of the individual or
entity to which it is addressed, and may contain information which is
privileged, confidential, proprietary or exempt from disclosure under
applicable law. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, you are
strictly prohibited from disclosing, distributing, copying or in any way
using this message. If you have received this communication in error,
please notify the sender, and destroy and delete any copies you may have
received.
WSP provides professional land surveying services through the following
entities: WSP Surveys (AB) Limited Partnership and WSP Surveys (BC)
Limited Partnership
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___