The 2 "systems" can perform differently at the same operating condition. What systems were used?
On 1/22/2016 9:12 AM,
alyelhefni@xxxxxxxxx [EnergyPlus_Support] wrote:
If I have 2 energyplus files , each having a different system . Both operate on the same weather file . And the single zone has same internal gain . Walls are all adiabatic .The 2 systems were designed to keep zone at 24C,50% .Now when I open the meter file after running simulation . I expect that the cooling enery transfered from zone per hour is the same for both files and what differs is the electric consumption . But what I get is a big difference in Cooling:EnergyTransfer: Zone:ZONE ONE [J](Hourly) between the 2 files .
Is that logic ? How can that happen if zone node has the same 24,50% ?
-- Richard Raustad Florida Solar Energy Center 1679 Clearlake Road Cocoa, FL 32922 Ph: (321)638-1454 http://www.fsec.ucf.edu/en/ Program Director Electric Vehicle Transportation Center http://evtc.fsec.ucf.edu/
__._,_.___
Posted by: Richard Raustad <rraustad@xxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___