[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Thermal capacity of walls





Yes the program can output some metrics, however, the key is getting the inputs correct- for that I use the spreadsheet sent.

Best of regards-






Jeremiah Crossett | Chief Technological Officer | NRGsim Inc. | www.nrgsim.com | 7409 SW Capitol Highway Portland OR, 97219 | 503-688-8951 


On Mon, Apr 11, 2016 at 8:21 AM, ademilson xavier ademilsonxavier@xxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 

Ivan and Leticia;
You're welcome!

I really hope have helped.

My best regards;

Ademilson Xavier.

(51) 8575 0797


De: "Ivan Mezzacapa ivan_slip@xxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Para: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Enviadas: Segunda-feira, 11 de Abril de 2016 11:39

Assunto: Re: [EnergyPlus_Support] Thermal capacity of walls

 
Thanks Ademilson!

Ivan Mezzacapa de Souza

Projetos de Ar Condicionado - Consultoria em Eficiência Energética - Simulação Energética
Celular: (11) 99963-9326




De: EnergyPlus_Support@xxxxxxxxxxxxxxx <EnergyPlus_Support@xxxxxxxxxxxxxxx> em nome de ademilson xavier ademilsonxavier@xxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Enviado: segunda-feira, 11 de abril de 2016 13:46
Para: EnergyPlus_Support@xxxxxxxxxxxxxxx
Assunto: Re: [EnergyPlus_Support] Thermal capacity of walls
 
 
Hi Leticia and Ivan, Good Day!

In my last simulations I am getting used to consider the values by report called Output: Variable, Surface Group: Surface Heat Storage Energy. 

As below:

! Program Version - EnergyPlus  Version 8.4.0-832e4bb9cb YMD=2016.04.05 16:53
! Output:Variable ObjectsIDD_Version 8.4.0
Output:VariableSurface Heat Storage Energyhourly
Output:VariableSurface Heat Storage Gain Ratehourly
Output:VariableSurface Heat Storage Loss Ratehourly
Output:VariableSurface Heat Storage Ratehourly
Output:VariableSurface Heat Storage Rate per Areahourly
Output:VariableSurface Average Face Conduction Heat Gain Ratehourly
Output:VariableSurface Average Face Conduction Heat Loss Ratehourly
Output:VariableSurface Average Face Conduction Heat Transfer Energyhourly
Output:VariableSurface Average Face Conduction Heat Transfer Ratehourly
Output:VariableSurface Average Face Conduction Heat Transfer Rate per Areahourly

I do not know another report or group to get it;

My best regards;

Ademilson Xavier.

(51) 8575 0797


De: "Ivan Mezzacapa ivan_slip@xxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Para: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Enviadas: Segunda-feira, 11 de Abril de 2016 10:25
Assunto: Re: [EnergyPlus_Support] Thermal capacity of walls

 
Leticia, 

i've checked here too and I do not find this output. 

You may need to request the outputs to calculate the thermal capacity. I believe that the software does not have this specific output.

Now i'm curious about this too. 

Regards,

Ivan Mezzacapa de Souza

Projetos de Ar Condicionado - Consultoria em Eficiência Energética - Simulação Energética
Celular: (11) 99963-9326




De: EnergyPlus_Support@xxxxxxxxxxxxxxx <EnergyPlus_Support@xxxxxxxxxxxxxxx> em nome de Leticia Neves leneves@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Enviado: segunda-feira, 11 de abril de 2016 13:09
Para: EnergyPlus_Support@xxxxxxxxxxxxxxx
Assunto: Re: [EnergyPlus_Support] Thermal capacity of walls
 
 
Hi, Ivan.

I already checked and it I didn't find it. Do you know the specific name of the output?

Regards,
Leticia

On Mon, Apr 11, 2016 at 9:18 AM, Ivan Mezzacapa ivan_slip@xxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
 
Hello Leticia, 

check these itens:

- Output:Table:SummaryReports
- Output:Variable

Maybe variables have the output that you need.

Best regards,

Ivan Mezzacapa de Souza

Projetos de Ar Condicionado - Consultoria em Eficiência Energética - Simulação Energética
Celular: (11) 99963-9326




De: EnergyPlus_Support@xxxxxxxxxxxxxxx <EnergyPlus_Support@xxxxxxxxxxxxxxx> em nome de Leticia Neves leneves@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Enviado: domingo, 10 de abril de 2016 19:57
Para: EnergyPlus_Support@xxxxxxxxxxxxxxx
Assunto: [EnergyPlus_Support] Thermal capacity of walls
 
 
Hello,

I need to calculate the thermal capacity of the walls of my model (kJ/m²K). How can I ask for this output in EnergyPlus? The table shows me only the thermal transmittance (U value).

Thank you in advance.
Regards,
Leticia Neves








__._,_.___

Posted by: Jeremiah Crossett <jcrossett@xxxxxxxxxx>


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___