Hello,
Thank you for your response. How about high rise building? Temperature and wind speed are going to be change with altitude. How can I export these data with measured data?
Thanks
Serter Iyigunlu
Mechanical Engineer
Mechanical Engineer
From: EnergyPlus_Support@xxxxxxxxxxxxxxx <EnergyPlus_Support@xxxxxxxxxxxxxxx> on behalf of Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx [EnergyPlus_Support]
<EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Tuesday, 6 September 2016 11:33 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] custom weather data
Sent: Tuesday, 6 September 2016 11:33 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] custom weather data
I think you have a misunderstanding of "weather". Weather is not different on each facade. Rather, some variables (e.g., surface temperature, solar gains, ground reflectance, shading) differ due to building shape, exposure to sun or adjacent shading or time
of day, but the weather is the same for all.
EnergyPlus accounts for all of these. You can report the differences if you wish to do so and then compare them with measured variables, but the weather file is a constant reference. You can also edit / customize a weather file to reflect local variations from
TMY data for variables such as dry bulb and wet bulb temperatures.
On Mon, Sep 5, 2016 at 1:57 AM,
serteri@xxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Hello,
How am I going to create a weather file that includes all four facades of building weather data and also all level of the building weather data into one weather file? I intend to install four sets of sensors (temperature,humidity and wind speed sensor) on one facade and the sensors will be installed four facades of the building. And also I do not want EnergyPlus to calculate CHTC for internal and external of the building. I would like to use CFD program to calculate and send these values to EnergyPlus because I will assess high-level building (30 levels at least).
I would like to use my weather file into the EnergyPlus. And also I would like to measure weather data for all levels of the building and use these data in EnergyPlus. I do not know how to do it. Could you please help me about that? How am I going to enter these values in to the weather file or is there any way to do it with Energy+.
Regards,
Thank you
James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504
Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website l LinkedIn | May 2016 ASHRAE Journal article on energy modeling
Believers in progress rightly note that in the world of machines, the new model supercedes the old; from this they falsely infer a similar kind of supercession in such things as virtue and wisdom
__._,_.___
Posted by: serter iyigunlu <serteri@xxxxxxxxxxx>
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___