I am sorry but I dont see the way how to indicate the hysteresis temperature range. 22+-1 ºC for heating and 25+-1ºC for cooling, via
a Schedule.
Regards.
De: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
Enviado el: lunes, noviembre 07, 2016 4:43 PM
Para: EnergyPlus_Support@xxxxxxxxxxxxxxx
Asunto: Re: [EnergyPlus_Support] how to define a dead band temperature in a thermal zone
How about Thermostat:DualSetpoint?
On Mon, Nov 7, 2016 at 10:41 AM, JUAN FRANCISCO BELMONTE TOLEDO
juanf.belmonte@xxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Hello all,
I would like to know if there is a way to include a dead band in a thermostat using the HVACTemplates objects, for instance, for heating i would like to specify to turn off the heating when a temperature of 23C is reached and turn on when it drops below 21C, that is, 22C with a hysteresis dead band of 1 C.
Regards.
JUAN FCO BELMONTE
--
James V Dirkes II, PE, BEMP, LEED AP
CEO/President
The Building Performance Team Inc.
1631 Acacia Dr, GR, Mi 49504
Direct: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website l LinkedIn |
May 2016 ASHRAE Journal article on energy modeling
�an open mind is not an end in ittself but rather is like an open mouth, designed to bite down on something solid and nourishing.
__._,_.___
Posted by: JUAN FRANCISCO BELMONTE TOLEDO <JuanF.Belmonte@xxxxxxx>
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___