Re: [EnergyPlus_Support] Need help for simulating sensor faults in E+

["Ying Yan ying.yan@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Thank you for your reply, I will double check the temperature at the mixed air node.

On Tue, Dec 6, 2016 at 1:44 PM, ajvxbkig7okhzqfzc6hthz7nky7nvg7tzf5z2yl2@xxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

 

Hi Yan, the "FaultModel:TemperatureSensorOffset:OutdoorAir" simulates the faulty behavior of economizer when there is an offset of outdoor air temperature sensor offset. The economizer would not take in the proper amount of outdoor air as it should be. It does not change the outdoor air temperature levels, which you outputted via "Site Outdoor Air Drybulb Temperature". 

I agree with Jim's comments. You can double check the temperature levels at the mixed air node.

--

Best Regards

Ying Yan

Graduate Student

Electrical & Computer Engineering

School of Engineering

University of Connecticut

__._,_.___

---

Posted by: Ying Yan <ying.yan@xxxxxxxxx>

---

EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The EnergyPlus web site is found at:
http://www.energyplus.net/

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• New Members 12

• Privacy • Unsubscribe • Terms of Use

__,_._,___