I'm getting the following warning although the X Reference point seems in the extremities of the zones.
As you can see in the following BuildingSurface:Detailed object, the extremities of the zones are:
5.207136850900, !- Vertex 1 X-coordinate {m}
17.496225443500, !- Vertex 2 X-coordinate {m}
In the GlobalGeometryRules object the "Daylighting Reference Point CoordinateSystem" field is Absolute.
** Warning ** GeometryTransformForDaylighting: Reference point X Value outside Zone Min/Max X, Zone=PIANO0:ZONA16
** ~~~ ** ...X Reference Point= 11.36, Zone Minimum X= 2.51, Zone Maximum X= 7.71
** ~~~ ** ...X Reference Distance Outside MaximumX= 3.6448 m.
BuildingSurface:Detailed,
Piano0:Zona16_Wall_5_0_0,!- Name
Wall, !- Surface Type
M14 Parete di progetto esterna MEIS V2, !- Construction Name
Piano0:Zona16, !- Zone Name
Outdoors, !- Outside Boundary Condition
, !- Outside Boundary Condition Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
AutoCalculate, !- View Factor to Ground
4, !- Number of Vertices
5.207136850900, !- Vertex 1 X-coordinate {m}
-7.685817960000, !- Vertex 1 Y-coordinate {m}
2.650582360000, !- Vertex 1 Z-coordinate {m}
17.496225443500, !- Vertex 2 X-coordinate {m}
-7.711210970000, !- Vertex 2 Y-coordinate {m}
2.650582360000, !- Vertex 2 Z-coordinate {m}
17.496225440000, !- Vertex 3 X-coordinate {m}
-7.711210970000, !- Vertex 3 Y-coordinate {m}
6.150582364200, !- Vertex 3 Z-coordinate {m}
5.207136850000, !- Vertex 4 X-coordinate {m}
-7.685817960000, !- Vertex 4 Y-coordinate {m}
6.150582364200; !- Vertex 4 Z-coordinate {m}
Best Regards
Francesco