[EnergyPlus_Support] Blowing air

["Paul paulnee@xxxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

All I want to do is blow some warm air into a cold basement and have it 
return through a duct. I did this but it doesn't work. What else should 
I do?

Thanks,

Paul

   AirflowNetwork:Distribution:Component:Duct,
     Duct-Bsmt-Zone1,         !- Name
     2.0,                     !- Duct Length {m}
     0.4064,                  !- Hydraulic Diameter {m}
     0.1297,                  !- Cross Section Area {m2}
     0.0009,                  !- Surface Roughness {m}
     0.01,                    !- Coefficient for Local Dynamic Loss Due 
to Fitting {dimensionless}
     0.946792,                !- Heat Transmittance Coefficient 
(U-Factor) for Duct Wall Construction {W/m2-K}
     0.0000001,               !- Overall Moisture Transmittance 
Coefficient from Air to Air {kg/m2}
     5.018000,                !- Outside Convection Coefficient {W/m2-K}
     25.090000;               !- Inside Convection Coefficient {W/m2-K}

   AirflowNetwork:Distribution:Linkage,
     Main Link,               !- Name
     Basement Zone,                !- Node 1 Name
     ZONE ONE,                !- Node 2 Name
     Duct-Bsmt-Zone1,         !- Component Name
     Basement Zone;                !- Thermal Zone Name

   AirflowNetwork:Distribution:Component:Fan,
     Supply Fan 1,            !- Fan Name
     Fan:ConstantVolume;      !- Supply Fan Object Type

   Fan:ConstantVolume,
     Supply Fan 1,            !- Name
     FanAvailSched,          !- Availability Schedule Name
     0.7,                     !- Fan Total Efficiency
     400.0,                   !- Pressure Rise {Pa}
     2.5,                    !- Maximum Flow Rate {m3/s}
     0.9,                     !- Motor Efficiency
     1.0,                     !- Motor In Airstream Fraction
     ZONE ONE,     !- Air Inlet Node Name
     Basement Zone;  !- Air Outlet Node Name

   AirflowNetwork:Distribution:Linkage,
     Fan Link,               !- Name
     ZONE ONE,                !- Node 1 Name
     Basement Zone,                !- Node 2 Name
     Supply Fan 1,         !- Component Name
     Basement Zone;                !- Thermal Zone Name




------------------------------------
Posted by: Paul <paulnee@xxxxxxxxxxxx>
------------------------------------

EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The EnergyPlus web site is found at:
http://www.energyplus.net/

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the &quot;search&quot; button.
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/