[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] timestep > 60
Hi, Colleagues,
Can anyone suggest a workaround to run E+ with a timestep larger than 60 (the maximum acceptable)? Let say 120 (i.e. time integration at 1/2 minutes interval). I am currently running a simulation that has a "fluid cooler" object and for the very hot days, I get an erroneous water temperature leaving the fluid cooler that is less than the outdoor temperature. The number of such anomalies greatly reduces with higher time resolution (for one case 500hr/yr with timestep=6 to 0.75hr/yr with timestep=60). I was trying to get rid of all this erroneous output.
Regards,
Tilek
__._,_.___
Posted by: tilek.aberra@xxxxxxxxx
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___