[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Uncertainty with Energy plus Enthalpy inputs for PCMs





Also I would be very grateful if someone could provide me with an example on which value you have put for fields High and Low Temperature Difference of Melting Curve.

Thanks in advance!

-------- Original message --------
From: "Jeremiah Crossett jcrossett@xxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Date: 3/13/18 18:58 (GMT+01:00)
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Uncertainty with Energy plus Enthalpy inputs for PCMs

 

Hi,


Can you please provide the test data on the PCM you’re modeling?  If you’re data has been tested with separate melting and freezing curves then the hysteresis model will work, otherwise the single curve model might be more appropriate. 

Sent from my iPhone

On Mar 13, 2018, at 7:20 AM, nedimho@xxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:

 

Dear Jeremiah,


I have a quick question about the MaterialProperty: PhaseChangeHysteresis object. I already looked in the input/output difference and can't figure out the difference, maybe it's a language barrier, however I hope you (or someone else) can clarify.

What is the difference between these two:

1.8.9.1.6 Field: High Temperature Difference of Melting Curve
This is the width of the enthalpy/specific heat melting curve, on the high side of the peak melting temperature, in Kelvin (technically it is “change in Kelvin”).

1.8.9.1.8 Field: Low Temperature Difference of Melting Curve
This is the width of the enthalpy/specific heat melting curve, on the low side of the peak melting temperature, in Kelvin (technically it is “change in Kelvin”).
 
 The material I am simulating starts melting at 23°C and finishes at 28°C. The peak melting temperature is 25°C.

I am very confused on what values to input under High/Low Temperature Difference of Melting Curve.

Thanks in advance!



__._,_.___

Posted by: Nedim Hodzic <nedimho@xxxxxxxx>


EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The EnergyPlus web site is found at:
http://www.energyplus.net/

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the &quot;search&quot; button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___