[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Ice Storage Charge/Discharge Controls in a DES model [2 Attachments]






My district cooling system has a big chiller operating 24 hours and a brine chiller with ice storage. The brine chiller with ice storage is set an ice charging mode from 9 pm to 9 am, while an ice discharging mode from 9 am to 9 pm.


My model (as attached image) currently does not work as I set for ice charge/discharge.


Ice Storage properly charged and discharged only when the cooling load is flat and higher than around 50,000 kwh. However, my actual cooling load has variations from 4,000 kWh to 90,000 kWh during a day. With this variation, the brine chiller with ice storage does not work at all even when the time of the cooling load higher.  


I saw that many mentioned about EME control. Can I get some help? 






__._,_.___
View attachments on the web

Posted by: mxubwjeb4np27xyfvaujbrhm3jntotcib62ys7s2@xxxxxxxxx


EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The EnergyPlus web site is found at:
http://www.energyplus.net/

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___
Attachment not found:
D:\Eudora\Attach\DES_Model_NEW_1 - Copy.idf
Attachment not found:
D:\Eudora\Attach\System Diagram.JPG