On Sun, Sep 2, 2018 at 10:30 AM, my_sunny_night@... [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:With which output variable, I can check whether additional outdoor air used for ventilation in Case 1 compared to Case 2?Another thing, all the assumptions for Case 1 and 2 are exactly the same for HVAC sizing using design day. But the design coil load for heating coil water of AHU is lower for Case 2.Any help would be appreciated.
---In EnergyPlus_Support@ yahoogroups.com, <jim@...> wrote :As you say, All of the lights and other electric equipment offset the need for heating, so the heating must operate more in Case 2 (when they are OFF).Iâ??m wondering if the higher peak heating for Case 1 is due to additional outdoor air used for ventilation?--On Wed, Aug 29, 2018 at 9:01 PM my_sunny_night@... [EnergyPlus_Support] <EnergyPlus_Support@ yahoogroups.com> wrote:Hello All,I have two identical case studies with identical assumptions for everything. I just set people, lights, and electric equipment loads to zero. Let us call this case as Case #2. For Case #1, I used default people, lights, and electric equipment assumptions.Annual total heating energy use is higher in Case #2 than Case #1, which makes sense.But, peak heating load in Case #2 is lower than Case #1.Why peak load of Case #2 is lower than Case #1 while total heating energy use of Case #2 is higher than Case #1?Thanks for your help.
James V Dirkes II, CEO / President
The Building Performance Team Inc.
1631 Acacia Dr, Grand Rapids, MI 49504--James V Dirkes II, CEO / President
The Building Performance Team Inc.
1631 Acacia Dr, Grand Rapids, MI 49504