[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] schedules resulting of EMS simulations (shading controls)





I am reviewing a large EnergyPlus file – 616 Zones, 47 HVAC Air Loops. I was hoping to report:

Output:Variable,

    *,

    Zone Air Terminal Outdoor Air Volume Flow Rate,

    Hourly; !- HVAC Average [m3/s]

 

The .idf already has a lot of Output:Variable requests and when I added the above, I got the warning that only the first 255 will be reported. So I removed all the original Output:Variable requests keeping only the above. With that change the file does not run, does not give any error report. When I say the file doesn’t run, it hangs after all the batch file stuff completes and before EnergyPlus starts reporting the day of the simulation. When I run the original file, it also hangs at this spot but after 2 hours and 16 minutes, it starts the simulation and runs to the end of the time period.

 

With the revised list of Output:Variable objects, I allowed 6 hours of hang time then gave up hitting Ctrl C.

 

The file also includes a bunch of EnergyManagementSystem: objects. I am wondering if there is a connection between Output:Variable objects and EnergyManagementSystem: objects and removing the Output:Variable objects causes the EnergyManagementSystem: object to not respond?

 

I cannot share the file. I could send the list of original Output:Variable objects and EnergyManagementSystem: system objects.

 

Christopher R Jones, P.Eng.

T+ 1 416-644-0252

 

 





NOTICE: This communication and any attachments ("this message") may contain information which is privileged, confidential, proprietary or otherwise subject to restricted disclosure under applicable law. This message is for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on, this message is strictly prohibited. If you have received this message in error, or you are not an authorized or intended recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies. You are receiving this communication because you are listed as a current WSP contact. Should you have any questions regarding WSP's electronic communications policy, please consult our Anti-Spam Commitment at www.wsp.com/casl. For any concern or if you believe you should not be receiving this message, please forward this message to caslcompliance@xxxxxxx so that we can promptly address your request. Note that not all messages sent by WSP qualify as commercial electronic messages.

AVIS : Ce message, incluant tout fichier l'accompagnant (« le message »), peut contenir des renseignements ou de l'information privilégiés, confidentiels, propriétaires ou à divulgation restreinte en vertu de la loi. Ce message est destiné à l'usage exclusif du/des destinataire(s) voulu(s). Toute utilisation non permise, divulgation, lecture, reproduction, modification, diffusion ou distribution est interdite. Si vous avez reçu ce message par erreur, ou que vous n'êtes pas un destinataire autorisé ou voulu, veuillez en aviser l'expéditeur immédiatement et détruire le message et toute copie électronique ou imprimée. Vous recevez cette communication car vous faites partie des contacts de WSP. Si vous avez des questions concernant la politique de communications électroniques de WSP, veuillez consulter notre Engagement anti-pourriel au www.wsp.com/lcap. Pour toute question ou si vous croyez que vous ne devriez pas recevoir ce message, prière de le transférer au conformitelcap@xxxxxxx afin que nous puissions rapidement traiter votre demande. Notez que ce ne sont pas tous les messages transmis par WSP qui constituent des messages electroniques commerciaux.



-LAEmHhHzdJzBlTWfa4Hgs7pbKl


__._,_.___

Posted by: "Jones, Christopher" <Christopher.r.Jones@xxxxxxx>


EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The EnergyPlus web site is found at:
http://www.energyplus.net/

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the &quot;search&quot; button.





__,_._,___