[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] schedules resulting of EMS simulations (shading controls)
Send the file and question to the helpdesk.
They will not share the file with anyone.
Linda
At 09:18 AM 10/1/2018, 'Jones, Christopher' christopher.r.jones@xxxxxxx
[EnergyPlus_Su wrote:
I am reviewing a large
EnergyPlus file â?? 616 Zones, 47 HVAC Air Loops. I was hoping to
report:
Output:Variable,
*,
Zone Air Terminal Outdoor Air Volume Flow Rate,
Hourly; !- HVAC Average [m3/s]
The .idf already has a lot of Output:Variable requests and when I added
the above, I got the warning that only the first 255 will be reported. So
I removed all the original Output:Variable requests keeping only the
above. With that change the file does not run, does not give any error
report. When I say the file doesnâ??t run, it hangs after all the batch
file stuff completes and before EnergyPlus starts reporting the day of
the simulation. When I run the original file, it also hangs at this spot
but after 2 hours and 16 minutes, it starts the simulation and runs to
the end of the time period.
With the revised list of Output:Variable objects, I allowed 6 hours of
hang time then gave up hitting Ctrl C.
The file also includes a bunch of EnergyManagementSystem: objects. I am
wondering if there is a connection between Output:Variable objects and
EnergyManagementSystem: objects and removing the Output:Variable objects
causes the EnergyManagementSystem: object to not respond?
I cannot share the file. I could send the list of original
Output:Variable objects and EnergyManagementSystem: system objects.
Christopher R Jones, P.Eng.
T+ 1 416-644-0252
![[]](txtJtRrV6XvPk.txt)
NOTICE: This communication and any attachments ("this message")
may contain information which is privileged, confidential, proprietary or
otherwise subject to restricted disclosure under applicable law. This
message is for the sole use of the intended recipient(s). Any
unauthorized use, disclosure, viewing, copying, alteration, dissemination
or distribution of, or reliance on, this message is strictly prohibited.
If you have received this message in error, or you are not an authorized
or intended recipient, please notify the sender immediately by replying
to this message, delete this message and all copies from your e-mail
system and destroy any printed copies. You are receiving this
communication because you are listed as a current WSP contact. Should you
have any questions regarding WSP's electronic communications policy,
please consult our Anti-Spam Commitment at
www.wsp.com/casl. For any concern
or if you believe you should not be receiving this message, please
forward this message to
caslcompliance@xxxxxxx so
that we can promptly address your request. Note that not all messages
sent by WSP qualify as commercial electronic messages.
AVIS : Ce message, incluant tout fichier l'accompagnant (« le message
»), peut contenir des renseignements ou de l'information privilégiés,
confidentiels, propriétaires ou à divulgation restreinte en vertu
de la loi. Ce message est destiné à l'usage exclusif du/des
destinataire(s) voulu(s). Toute utilisation non permise, divulgation,
lecture, reproduction, modification, diffusion ou distribution est
interdite. Si vous avez reçu ce message par erreur, ou que vous n'êtes
pas un destinataire autorisé ou voulu, veuillez en aviser l'expéditeur
immédiatement et détruire le message et toute copie électronique ou
imprimée. Vous recevez cette communication car vous faites partie des
contacts de WSP. Si vous avez des questions concernant la politique de
communications électroniques de WSP, veuillez consulter notre Engagement
anti-pourriel au www.wsp.com/lcap.
Pour toute question ou si vous croyez que vous ne devriez pas recevoir ce
message, prière de le transférer au
conformitelcap@xxxxxxx afin
que nous puissions rapidement traiter votre demande. Notez que ce ne sont
pas tous les messages transmis par WSP qui constituent des messages
electroniques commerciaux.
-LAEmHhHzdJzBlTWfa4Hgs7pbKl
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups..yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___