[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Re: Eplus Heat Balance for opaque and transparent building component
timestep will report at the "timestep in hour"
frequency.
system timestep -- you will need to report at
"detailed".
but depends on what you are going to do with it. (If it's a zone
variable, then timestep is adequate)
At 07:58 AM 10/22/2018, Jim Dirkes jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
[EnergyPlus_Support] wrote:
Jean is referring to the
structure of the Output:Variables. You want them to reference
"timestep" in the last field, e,g.,
 Output:Variable,*,System Node
Temperature,
timestep;
On Mon, Oct 22, 2018 at 9:40 AM
lucacaruso@xxxxxxx
[EnergyPlus_Support]
<
EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
- Â
- Hi Jean,
- when you say
- Make sure to report at timestep frequency as the default setting is
usually hourly.Â
- You mean to divide the results by 6? Because my timesteps are 6 and
the results are exported as hourly.
- Thanks in advance
--
James V Dirkes II, CEO / President
The Building Performance Team Inc.
1631 Acacia Dr, Grand Rapids, MI 49504
(alphabet soup of efforts for greater understanding: PE, BEMP, BCxP, LEED
AP)
Direct / Mobile: 616.450.8653
jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Website l Â
LinkedIn
Coffee conversation:
Is life a snow saucer ride down a mountainside?
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups..yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___