[EnergyPlus_Support] EnergyPlus Air Speed

["Esteban Estrella Guillén estebanestrellag@xxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx>]

Hello, 

I'm simulating a free-running building, with natural ventilation activated (air flow network) based on setpoints. I need to have the average Air Speed (m/s) of each zone as an output for some calculations but haven't found a way to do it. A proxy output that I could use to calculate or approximate air speed would work as well. The closest thing I found in the engineering reference is AFN Zone Mixing Mass Flow Rate [kg/s], yet it doesn't show up in my model outputs.. I think the air speed might be already calculated by EnergyPlus or could be approximated, but I haven't found a way to get it as an output. If anybody could help me out, thanks!

--

Esteban Estrella Guillén
Arquitecto | MDes '18 | LEED AP BD+C

Profesor de Arquitectura, Universidad de Monterrey

__._,_.___

---

Posted by: =?UTF-8?Q?Esteban_Estrella_Guill=C3=A9n?= <estebanestrellag@xxxxxxxxx>

---

EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The EnergyPlus web site is found at:
http://www.energyplus.net/

The group web site is:
http://groups..yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___