[Equest-users] eQuest refrigeration and hourly reports

[Karen Walkerman]

Brian,

Thanks for your response.  Here's the deal, when I'm in the "Hourly Results
Selection" menu, I can select "Refrigeration Fixture" or one of the others
as a variable type, however, when I pick a specific fixture (or compressor,
or whatever), there are no variables listed for printing!  I am using
version 3.61, if that makes any difference.



Thanks again,

--
Karen

On Fri, Dec 5, 2008 at 8:38 AM, Brian Davis <BDavis at dwyer.com> wrote:

>  Karen,
>
>
>
> I have found that you can, however those options do not show up at first.
> When you go to create a new hourly block, select "GLOBAL"  as the variable
> type then use the default "CLEARNESS NUMBER" as the variable list.  These
> really don't matter as you will be changing them later.  Once done, go back
> into the block, now under viable type, there are many more options, all of
> which you are looking for below.
>
>
>
> Not sure why you cannot select them from the start, but they are there.
>
>
>
> Brian
>
>
>
> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Karen Walkerman
> *Sent:* Thursday, December 04, 2008 6:42 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] eQuest refrigeration and hourly reports
>
>
>
> one more question...
>
> why can't I get any hourly info on compressors, condensers, refrigeration
> systems, refrigeration circuits, etc???  How am I going to trouble-shoot?
>
> Thanks again,
>
> --
> Karen
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081205/d21b6658/attachment-0002.htm>