[Equest-users] eQuest output reports

[Mark Nieman]

There are two ways. You can open the .SIM file (in Windows Explorer in
the project directory) for the appropriate run or through eQUEST's menu,
click "Tools/View Simulation Output..." and select your output and click
"Open". Either way should open the .SIM viewer that allows you to jump
to each relevant report (the .SIM file is a normal text file).


Mark Nieman, PE, CEM | McKinstry | Energy & Facility Solutions
d 206.832.8152 | m 206.510.4760 | f 206.832.8552
FOR THE LIFE OF YOUR BUILDING

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Marcus
Eliason
Sent: Thursday, May 29, 2008 3:07 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] eQuest output reports


Hello

I have been looking through some comments on a LEED certification
application.  One of the issues that was noticed was the lack of eQuest
BEPS, BEPU and ES-D reports.  I don't seem to be able to locate these
reports in my summary after I run a simulation.  Can anyone tell me how
I can access these reports?

Thanks,

Marcus Eliason
Essex Engineering Corporation
404.365.9482
meliason at essexco.com


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

This email is the property of McKinstry or one of its affiliates and may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error please notify the sender immediately and delete this e-mail. 
Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.