[Equest-users] Multiple HVAC systems in a single zone

[Poddar, Rishi]

To all the knowledgeable eQuest users,

 

I am working on a design for an institutional building. Each room in the
building is its own zone. The rooms will have in floor heating connected
to a geothermal loop as well as a forced air system which will primarily
provide the required ventilation, but also heating from a supplemental
gas boiler. The core of the building will only be serviced by the forced
air system. I believe this can be done in eQUEST but I am not sure how.
The main question, is it possible to define two HVAC systems for a
single zone? Two possible operation models, one system operates at
certain times of the day, the other works at different times of the day.
The other operation model is one system works up to a certain percentage
of the requirement, and the second system meets the remaining demand. I
believe "equipment controls" can handle this, but I'm not sure how to
set it up.

Sincerely,

Rishi Poddar
Project Development Specialist

Ameresco Canada Inc.

 


	**************************************************************************************
NOTE: This e-mail may contain PRIVILEGED and CONFIDENTIAL information and is intended only for the use of the specific individual(s) to which it is addressed. If you are not an intended recipient of this e-mail, you are hereby notified that any unauthorized use, dissemination or copying of this e-mail or the information contained in it or attached to it is strictly prohibited. If you have received this e-mail in error, please delete it and immediately notify the person named above by reply e-mail. Thank you.
	**************************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081105/d1e0ce7f/attachment.htm>