[Equest-users] Assigning Cooling Sources to Zones

[Karen Walkerman]

It works much better to create "zone groups" on the zone group screen of the
building shell wizard, and then select your HVAC system for each zone
group.  I've found that selecting zones to be served from the HVAC screen to
be unreliable.

You can also make any changes you wish in the detailed mode.

--
Karen

On Tue, Sep 2, 2008 at 3:58 PM, Margo Sauter <msauter at advancedenergy.org>wrote:

>  Is there anyway to assign a heat pump to an assigned zone?  I currently
> have made 11 zones so I want to assign a heat pump to each zone.  The only
> chooses I am given are very general, like All Core Above Grade Zones and All
> Perimeter Above Grade Zones.  What is the point of making the different
> zones if I can not assign anything to them?  I am working from the Building
> Wizard on page 1 of the Air-System Type.
>
>
>
> If anyone can help me understand this or to perform the task I want to do
> that would be greatly appreciated.
>
>
>
> Thanks,
>
>
>
> Margo Sauter
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080902/e211c6af/attachment-0001.htm>