[Equest-users] Assigning Cooling Sources to Zones

Margo Sauter msauter at advancedenergy.org
Tue Sep 2 13:53:40 PDT 2008


When I selected Air-Side System and go down to the last two drop boxes
on the bottom of the screen, I select the shell component that I am
working on. Do I then leave the description of assigned zones to the
default of All Zones?

 

Thanks,

 

Margo

 

 

 

________________________________

From: Karen Walkerman [mailto:kwalkerman at gmail.com] 
Sent: Tuesday, September 02, 2008 4:23 PM
To: Margo Sauter
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Assigning Cooling Sources to Zones

 

It works much better to create "zone groups" on the zone group screen of
the building shell wizard, and then select your HVAC system for each
zone group.  I've found that selecting zones to be served from the HVAC
screen to be unreliable.

You can also make any changes you wish in the detailed mode.

--
Karen

On Tue, Sep 2, 2008 at 3:58 PM, Margo Sauter
<msauter at advancedenergy.org> wrote:

Is there anyway to assign a heat pump to an assigned zone?  I currently
have made 11 zones so I want to assign a heat pump to each zone.  The
only chooses I am given are very general, like All Core Above Grade
Zones and All Perimeter Above Grade Zones.  What is the point of making
the different zones if I can not assign anything to them?  I am working
from the Building Wizard on page 1 of the Air-System Type.

 

If anyone can help me understand this or to perform the task I want to
do that would be greatly appreciated.

 

Thanks,

 

Margo Sauter 


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG






-- 
This message has been scanned for viruses and 
dangerous content by SecureMail and is 
believed to be clean. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080902/0d5cf9d6/attachment-0002.htm>


More information about the Equest-users mailing list