[Equest-users] Fan-Pwr-fPLR-w/VFD

[James Hansen]

Does anyone have the default curve data for this fan curve?

 

I've got a built-up AHU I'm modeling with a fan-wall configuration, and
I know that the EIR vs part load ratio should be better than the default
VFD fan curve.

 

But I can't seem to get  savings by defining a performance curve using
the 100%, 90%, 80%, etc values.  It might help if I had the default
values.

 

Thanks!

 

GHT Limited
James Hansen, PE, LEED AP

Senior Associate

1010 N. Glebe Rd, Suite 200

Arlington, VA  22201-4749

703-338-5754 (Cell)

703-243-1200 (Office)

703-276-1376 (Fax)

www.ghtltd.com <http://www.ghtltd.com/> 


The information contained in this communication is confidential, may be privileged, and is intended only for the use of the addressee.  It is the property of GHT Limited.  Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify me immediately by return e-mail or by e-mail to ght at ghtltd.com, and destroy this communication and all copies thereof, including all attachments.  Thank you.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090416/6987b711/attachment.htm>