[Equest-users] Making global/universal changes

[Ramana Koti]

Patrick, have you explored creating and assigning global parameters?

Ramana.


On Tue, Apr 7, 2009 at 10:44 AM, Patrick Lynch <LynchP at erdmananthony.com>wrote:

>  Hello all,
>
>
>
> I’ve been working in eQuest for about a month now and I just cannot figure
> out an easy way to make global changes in this program. The easiest way I
> have figured out how to make changes for the whole system is to go into the
> spreadsheet tab and change all the numbers one by one. For instance, if I
> want to change my Flow/Area on my VAVs I currently go into the spreadsheet
> and change each number, or set it back to the default, which is equally as
> annoying, because I just copy/paste.   It looks like it should work like
> excel, but it doesn’t. I figure there has to be an easier way to change
> these numbers(besides going back into the wizard mode). Is there a way to
> enter all of my numbers at once, or at least a better technique than I am
> currently using?  I know many of you have been using this program for quite
> a while so any advice would be appreciated.
>
>
>
> Thanks,
>
>
>
> *Patrick J. Lynch*
>
> Facilities Engineering
>
> Erdman Anthony
>
> 2165 Brighton Henrietta Town Line Rd
>
> Rochester, New York 14623
>
> [T] 585.427.8888 ext. 363
>
> [F] 585.427.8914
>
> www.erdmananthony.com/
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090407/ee33bab7/attachment-0002.htm>