[Equest-users] space has no ZONE - one is required

[James D. Waechter]

All,

 

On the baseline model for a project, I continue to get the following
error despite several attempts to remedy: SPACE E13 NNW Perim Spc
(M.NNW51) has no ZONE - one is required.

My attempts to fix it have included:

*	trying to locate a ZONE definition within the program -
unsuccessful
*	directly editing the BDL file by pasting a missing section from
the Proposed BDL file - didn't work; errored out anyway (see below)
*	deleting the error at the end of the BDL file - didn't work;
errored out anyway

 

I've included the text below from the Designed (proposed) BDL file.  I
believe the bolded text is what is missing from the Baseline BDL file.

The text below is from the Baseline BDL file indicating where I think
the missing text would go.

     *90096*    SPACE            = "E13 North Perim Spc (M.N50)"

     *91135* "E13 Sys2 (PMZS) (M.N50)" = SYSTEM

     *90097*    ..

     *91136*    TYPE             = PTAC

     *90098* "E13 Sys2 (FC) (M.NNW51)" = SYSTEM

     *91137*    HEAT-SOURCE      = HOT-WATER

     *90099*    TYPE             = FC

     *91138*    BASEBOARD-SOURCE = NONE

     *90100*    HEAT-SOURCE      = HOT-WATER

     *91139*    SIZING-RATIO     = 1

     *90101*    BASEBOARD-SOURCE = NONE

     *91140*    HEAT-SIZING-RATI = 1.25

     *90102*    SIZING-RATIO     = 1.15

     *91141*    COOL-SIZING-RATI = 1.15

     *90103*    MAX-SUPPLY-T     = 95

     *91142*    MAX-SUPPLY-T     = 90

     *90104*    MIN-SUPPLY-T     = 55

     *91143*    MIN-SUPPLY-T     = 55

     *90105*    ECONO-LIMIT-T    = 65

     *91144*    FAN-SCHEDULE     = "S2 Sys2 (PMZS) Fan Sch"

     *90106*    OA-CONTROL       = FIXED

     *91145*    FAN-CONTROL      = FAN-EIR-FPLR

     *90107*    FAN-SCHEDULE     = "S2 Sys2 (FC) Fan Sch"

     *91146*    SUPPLY-STATIC    = 0.15

     *90108*    SUPPLY-STATIC    = 0.5

     *91147*    SUPPLY-EFF       = 0.507515

     *90109*    SUPPLY-EFF       = 0.328

     *91148*    HW-VALVE-TYPE    = TWO-WAY

     *90110*    HW-VALVE-TYPE    = TWO-WAY

     *91149*    HW-COIL-DT       = 50

     *90111*    HW-LOOP          = "Hot Water Loop"

     *91150*    HW-LOOP          = "Hot Water Loop"

     *90112*    CHW-VALVE-TYPE   = TWO-WAY

     *91151*    COOLING-EIR      = 0.3667

     *90113*    CHW-LOOP         = "Chilled Water Loop"

     *91152*    FURNACE-HIR      = 1.24067

     *90114*    FURNACE-HIR      = 1.24067

     *91153*    ..

     *90115*    ..

>>>INSERT MISSING TEXT HERE<<<

     *90116* "E13 NNW Perim Zn (M.NNW51)" = ZONE

     *91154* "E13 North Perim Zn (M.N50)" = ZONE

     *90117*    TYPE             = CONDITIONED

     *91155*    TYPE             = CONDITIONED

     *90118*    MIN-FLOW-RATIO   = 1

     *91156*    MIN-FLOW-RATIO   = 1

     *90119*    FLOW/AREA        = 0.5

     *91157*    FLOW/AREA        = 0.5

     *90120*    OA-FLOW/PER      = 1.0846

     *91158*    OA-FLOW/PER      = 1.0846

     *90121*    DESIGN-HEAT-T    = 72

     *91159*    DESIGN-HEAT-T    = 72

     *90122*    HEAT-TEMP-SCH    = "S2 Sys2 (FC) Heat Sch"

     *91160*    HEAT-TEMP-SCH    = "S2 Sys2 (PMZS) Heat Sch"

     *90123*    DESIGN-COOL-T    = 75

     *91161*    DESIGN-COOL-T    = 75

     *90124*    COOL-TEMP-SCH    = "S2 Sys2 (FC) Cool Sch"

     *91162*    COOL-TEMP-SCH    = "S2 Sys2 (PMZS) Cool Sch"

     *90125*    SIZING-OPTION    = ADJUST-LOADS

     *91163*    SIZING-OPTION    = ADJUST-LOADS

     *90126*    SPACE            = "E13 NNW Perim Spc (M.NNW51)"

     *91164*    SPACE            = "E13 North Perim Spc (M.N50)"

     *90127*    ..

 

     *90128* "E13 Sys2 (FC) (M.C52)" = SYSTEM

 

 

Please let me know of any thoughts or suggestions you may have.  Any
help is appreciated.

 

Regards,

James D. Waechter, P.E., LEED A.P.

Beaudin Ganze Consulting Engineers

P  303.278.3820 x 5246

F  303.278.3843

 

76% of Staff LEED Accredited Professionals! <http://www.bgce.com/> 

P   Please consider the environment before printing

 

 

 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090202/68fc4001/attachment.htm>