[Equest-users] Details report

[Karl Stum]

Don't you have the two reports switched? By the numbers that's what it
appears. You say the SS-D is sensible + latent and the LS-D is sensible
only, but the numbers and the report abbrev seem to say they're switched.

 

____________________________

Karl Stum, PE

360 573 5700 ofc
360 771 0918 cell

Summit Building Engineering

  _____  

From: Steve Mignogna [mailto:smignogna at gmail.com] 
Sent: Thursday, February 12, 2009 1:01 PM
To: fposer at libero.it
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Details report

 

Here are two screenshots explaining the differences between the two reports.
Does this answer your question?  If not I will explain in more detail.

On Wed, Feb 11, 2009 at 11:49 AM, fposer at libero.it <fposer at libero.it> wrote:

 Hi folks,

i have a question for you.

Comparing the "REPORT - SS-D Building
HVAC Load Summary" with the "REPORT - LS-D Building Monthly Loads Summary"
I'
ve noticed that the values of heating and cooling energy are different
between
the two reports. Why it's happen? What's the difference between the two
reports?

Thanks a lot.
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG




-- 
Steve Mignogna
Atelier Ten

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090212/26c232ac/attachment-0001.htm>