[Equest-users] GSHP simulation crashing

[Steve Mignogna]

Stephen-

I would recommend looking at the sim file for the project that crashed.  Try
to determine where the sim file stopped and it should give you an idea of
what is crashing the model.  If you are having trouble, email the sim file
and I will try to determine for you.

-- 
Steve Mignogna
Atelier Ten


On Fri, Feb 27, 2009 at 10:15 AM, Stephen Parker <sparker at bucknell.edu>wrote:

> Hello All,
>
> I have just modeled a building with a ground source heat pump for the first
> time and I have been having some issues to get it running properly.  When I
> attempt to simulate the building performance, the model gets about 18% into
> its simulation at which point it attempts to simulate the affects of the
> HVAC system and then eQuest can go no further and crashes.  To make sure the
> crash was not due to any other area of the model I changed to HVAC system to
> another type and it is able to simulate with no problems.  Has anyone had
> this problem before or does anybody have any advice in regards to
> troubleshooting this problem?
>
> Thanks,
>
> Stephen Parker
> Bucknell University
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090227/2c6c4a2a/attachment-0002.htm>