[Equest-users] LEED baseline building window distribution in DE mode?

[Ryan Lacey]

Hello all,

Thank you to all that have been answering my questions throughout this last
week.  You have been a great help.  

 

I am modeling a building for LEED.  Once I finish modeling my building as
designed, I need to model compare the model to a baseline building.  One of
the baseline building requirements is to have equal window distribution on
all facades.  I know that in the wizard, if you know your window %’s that
you can specify a window width of 0 it will create a single long window per
façade.  Unfortunately, I used the custom window/door placement & am
planning on taking the plunge into DE mode to polish off my As Designed
building.  In DE mode, is there a simple way to model windows in a strip
fashion as LEED baseline buildings require? 

 



 

Thanks,

 

Ryan Lacey

LEED AP

Petersen Engineering, Inc.

PO Box 4774

6 Market Square

Portsmouth, NH 03801

Phone 603.436.4233 x113

Fax 603.436.4294

www.petersenengineering.com

ryan at petersenengineering.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090116/b640aa9f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 16232 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090116/b640aa9f/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 6489 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090116/b640aa9f/attachment-0001.jpeg>