[Equest-users] Combining zones in detailed interface
oschwieterman at fhai.com
Thu Jul 23 05:04:55 PDT 2009
I am currently working on a 74,000 SF building and the current system
has a chilled water loop and a hot water loop. When I created the zones
in the wizard, I created a zone for each room in order to properly run a
day-lighting schedule. Now I want to create my baseline schedule but the
required system falls under System 3 Packaged Single Zone system
(PSZ-AC). Is there some way to create to convert every zone into a
single zone in the detailed interface?
Thanks for your help in advance,
Otto Schwieterman, LEED AP
tel. (419) 586-7771
fax (419) 586-2141
E-mail: oschwieterman at fhai.com
Fanning/Howey Associates, Inc. intends to send this transmission (including any attachments) only to the
designated individual or entity. If you received this message in error, please notify the sender by replying
to the electronic mail (if electronic) or by telephone at the number indicated on this document.
Fanning/Howey Associates, Inc. has taken reasonable precautions to ensure no viruses are present in the
electronic mail. Fanning/Howey Associates, Inc., will not accept responsibility for any loss or damage arising
from the use of this electronic mail or attachments. Use, disclosure, dissemination, distribution, or reproduction
of this message by unintended recipients is not authorized and maybe unlawful. Any information included in
this transmission that is not related to contracts with our authorization, verbal or written, by Fanning/Howey
Associates, Inc. may not be covered by our professional liability insurance.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users