[Equest-users] District Cooling

Seth P. Spangler sspangle at rmf.com
Thu Jun 18 05:16:59 PDT 2009


Short answer YES!

 

In brief you will connect your building to a chilled water loop and put
an energy meter on the loop to calculate the amount of energy used. You
can then add an energy rate to the chilled water meter to calculate your
annual cost.

 

However, if this is a LEED building registered in LEED NC v2.2 (and some
other versions) after May 28th 2008 you MUST use the LEED document
"Required Treatment of District Thermal Energy..." which will
significantly change how your project will be modeled.

 

Seth Spangler, LEED(r) AP 

Project Engineer

 

RMF Engineering, Inc 

Ph: (843) 971-9639 ext:1497

Fax: (843) 971-9641 

sspangle at rmf.com

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of wallie
padero
Sent: Thursday, June 18, 2009 2:36 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] District Cooling

 


Hi guys!

Can we model a project being served by a District Cooling Plant in
E-quest?

More thanks in advance.

Wallie 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090618/5c381bc9/attachment-0001.htm>


More information about the Equest-users mailing list