[Equest-users] Water loop Heat pump

[Howe, Timothy]

When in design wizard select under HVAC system cooling type DX and under heating type DX Heat pump.  This will set your system type to PVVT which is ok.
 
Search the archives for other pointers.
 
Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec
2060 Brighton-Henrietta Town Line Road
Rochester NY 14623-2792
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

stantec.com <http://www.stantec.com/>  
 
The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.
 
ü Please consider the environment before printing this email.
 

________________________________

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Charles Land
Sent: Friday, May 01, 2009 10:36 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Water loop Heat pump



I am currently trying to model a system which uses a water source heat pump. I have never modeled this system before, and was wondering if any one had any pointers.  I have my heat rejection set up, but shouldn't there be some way to get my boiler and heating coils on this same loop as well.  Any help would be much appreciated.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090501/a0696ed3/attachment-0001.htm>