[Equest-users] eQuest - Modeling Elevators and Escalators

[Vikram Sami]

When you set up a direct load on a meter, it asks you for an end use to assign it to (I normally chose Misc Equipment). This makes it hard to separate out the elevator loads from the other misc equipment. I would recommend setting up a separate meter for this. That way you can separate out the elevator usage numbers from the BEPS & BEPU reports. 

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300, Atlanta, GA 30361 
Responsive Design · Technological Expertise · Exceptional Service 
Please visit our new website | www.lordaecksargent.com <file:///\\www.lordaecksargent.com\> 

P Think GREEN before you print.

 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Howe, Timothy
Sent: Thursday, May 28, 2009 7:48 AM
To: Aswan Ali; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] eQuest - Modelling Elevators and Escalators

 

Go to electric meter EM1 and click on tab Direct Loads and add the kW to the interior direct loads and assign a schedule.

 

Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec
2060 Brighton-Henrietta Town Line Road
Rochester NY 14623-2792
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

stantec.com <http://www.stantec.com/>  

 

The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

 

ü Please consider the environment before printing this email.

 

 

________________________________

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Aswan Ali
Sent: Thursday, May 28, 2009 6:32 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] eQuest - Modelling Elevators and Escalators

Hi all,

 

Does anyone know how to model elevators and escalators on eQUEST for LEED?

 

Many thanks,

 

Aswan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090528/6e9f04cc/attachment-0002.htm>