[Equest-users] Metric project.

[Steve Mignogna]

john,

I would just re-size the autocad floor plans so that they are in IP units.
Then you should be able to work in eQuest. You shouldn't have any problems.


-- 
Steve Mignogna
Atelier Ten



On Thu, Oct 15, 2009 at 10:17 AM, Christopher Jones <cj at enersave.ca> wrote:

>  Yes, as I stated below.  If you really need DOE-2.2 then there is no
> metric interface as yet.
>
>
> Gentlemen (and Ladies):
>
> Is this not a front end for DOE-2.1E, not DOE-2.2 (eQuest front end)?
>
>
>
>
> John R. Aulbach, PE, CEM<?xml:namespace prefix = o ns =
> "urn:schemas-microsoft-com:office:office" />
>
>
> Senior Energy Engineer
>
> *Partner Energy
> *
> 1990 E. Grand Avenue, El Segundo, CA 90245
> W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
>
>  www.ptrenergy.com | jaulbach at ptrenergy.com <%7C%20jaulbach at ptrenergy.com>
>
> --- On *Wed, 10/14/09, Christopher Jones <cj at enersave.ca>* wrote:
>
> From: Christopher Jones <cj at enersave.ca>
> Subject: Re: [Equest-users] Metric project.
> To: "John Howe" <JHowe at jbace.com>
> Cc: equest-users at lists.onebuilding.org
> Date: Wednesday, October 14, 2009, 7:09 AM
>
> Equest may not be very helpful here.  You can always use EE4 - a simple
> interface to DOE2.1e that allows full input in metric and converts to
> imperial for running the model.  I find that EE4 will give just as accurate
> an answer a equest for over 90% of the building simulation problems I face.
> Get it at:
>
>
> http://canmetenergy-canmetenergie.nrcan-rncan.gc.ca/eng/software_tools/ee4.html
>
> Note that EE4 generates the Budget Case for the MNECB but not for ASHRAE
> 90.1.  As with equest, you will have to create your own Budget case.
>
>
> At 01:25 PM 10/8/2009, John Howe wrote:
>
> Content-class: urn:content-classes:message
> Content-Type: multipart/alternative;
>          boundary="----_=_NextPart_001_01CA483C.5DDB8FD5"
>
>
> I have a job that is designed entirely in metric, including the CAD files.
> Can I do the entire model in metric?
>
>
>  John Howe, P.E., LEED AP
> Project Engineer
> jba consulting engineers
>  JBA Denver · 13772 Denver West Pkwy, Suite 200 · Lakewood, CO 80401
> p 303.985.3260 · f 303.987.2304  · jhowe at jbace.com
>
>  _______________________________________________
> Equest-users mailing list
>  http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
> >>
> Christopher Jones, P.Eng.
> Suite 1801, 1 Yonge Street
> Toronto, ON M5E1W7
> Tel. 416-203-7465
> Fax. 416-946-1005
> email cj at enersave.ca
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Equest-users mailing list
>  http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<http://us.mc528.mail.yahoo.com/mc/compose?to=EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG>
>
>  >>
> Christopher Jones, P.Eng.
> Suite 1801, 1 Yonge Street
> Toronto, ON M5E1W7
> Tel. 416-203-7465
> Fax. 416-946-1005
> email cj at enersave.ca
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091016/9b3e063e/attachment-0001.htm>