[Equest-users] Metric project.

John Aulbach jra_sac at yahoo.com
Fri Oct 16 09:48:04 PDT 2009


Folks:
 
I responded to a question. Please don't answer ME !!
 
Thank you.
 
Go Angels !!

--- On Fri, 10/16/09, Steve Mignogna <smignogna at gmail.com> wrote:


From: Steve Mignogna <smignogna at gmail.com>
Subject: Re: [Equest-users] Metric project.
To: "Christopher Jones" <cj at enersave.ca>
Cc: "John Aulbach" <jra_sac at yahoo.com>, equest-users at lists.onebuilding.org
Date: Friday, October 16, 2009, 7:12 AM


john,

I would just re-size the autocad floor plans so that they are in IP units. Then you should be able to work in eQuest. You shouldn't have any problems.


-- 
Steve Mignogna
Atelier Ten




On Thu, Oct 15, 2009 at 10:17 AM, Christopher Jones <cj at enersave.ca> wrote:


Yes, as I stated below.  If you really need DOE-2.2 then there is no metric interface as yet.




Gentlemen (and Ladies):
 
Is this not a front end for DOE-2.1E, not DOE-2.2 (eQuest front end)?
 

 

John R. Aulbach, PE, CEM<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />




Senior Energy Engineer

Partner Energy

1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745

www.ptrenergy.com | jaulbach at ptrenergy.com

--- On Wed, 10/14/09, Christopher Jones <cj at enersave.ca> wrote:



From: Christopher Jones <cj at enersave.ca>

Subject: Re: [Equest-users] Metric project.

To: "John Howe" <JHowe at jbace.com>

Cc: equest-users at lists.onebuilding.org

Date: Wednesday, October 14, 2009, 7:09 AM


Equest may not be very helpful here.  You can always use EE4 - a simple interface to DOE2.1e that allows full input in metric and converts to imperial for running the model.  I find that EE4 will give just as accurate an answer a equest for over 90% of the building simulation problems I face.  Get it at:


http://canmetenergy-canmetenergie.nrcan-rncan.gc.ca/eng/software_tools/ee4.html 


Note that EE4 generates the Budget Case for the MNECB but not for ASHRAE 90.1.  As with equest, you will have to create your own Budget case.



At 01:25 PM 10/8/2009, John Howe wrote:


Content-class: urn:content-classes:message

Content-Type: multipart/alternative;

         boundary="----_=_NextPart_001_01CA483C.5DDB8FD5"


 

I have a job that is designed entirely in metric, including the CAD files. Can I do the entire model in metric?

 

 

John Howe, P.E., LEED AP

Project Engineer

jba consulting engineers

JBA Denver · 13772 Denver West Pkwy, Suite 200 · Lakewood, CO 80401

p 303.985.3260 · f 303.987.2304  · jhowe at jbace.com

 

_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org 

To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>

Christopher Jones, P.Eng.

Suite 1801, 1 Yonge Street

Toronto, ON M5E1W7

Tel. 416-203-7465

Fax. 416-946-1005

email cj at enersave.ca


-----Inline Attachment Follows-----


_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org 

To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG





>>
Christopher Jones, P.Eng.
Suite 1801, 1 Yonge Street
Toronto, ON M5E1W7
Tel. 416-203-7465
Fax. 416-946-1005
email cj at enersave.ca

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG







      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091016/c419b67f/attachment-0001.htm>


More information about the Equest-users mailing list