[Equest-users] Metric project.

[Steve Mignogna]

Sorry. I was actually responding to John Howe !!

GO YANKEES!!



On Fri, Oct 16, 2009 at 12:48 PM, John Aulbach <jra_sac at yahoo.com> wrote:

> Folks:
>
> I responded to a question. Please don't answer ME !!
>
> Thank you.
>
> Go Angels !!
>
> --- On *Fri, 10/16/09, Steve Mignogna <smignogna at gmail.com>* wrote:
>
>
> From: Steve Mignogna <smignogna at gmail.com>
> Subject: Re: [Equest-users] Metric project.
> To: "Christopher Jones" <cj at enersave.ca>
> Cc: "John Aulbach" <jra_sac at yahoo.com>, equest-users at lists.onebuilding.org
> Date: Friday, October 16, 2009, 7:12 AM
>
>
> john,
>
> I would just re-size the autocad floor plans so that they are in IP units.
> Then you should be able to work in eQuest. You shouldn't have any problems.
>
>
> --
> Steve Mignogna
> Atelier Ten
>
>
>
> On Thu, Oct 15, 2009 at 10:17 AM, Christopher Jones <cj at enersave.ca<http://us.mc528.mail.yahoo.com/mc/compose?to=cj@enersave.ca>
> > wrote:
>
>> Yes, as I stated below.  If you really need DOE-2.2 then there is no
>> metric interface as yet.
>>
>>
>>  Gentlemen (and Ladies):
>>
>> Is this not a front end for DOE-2.1E, not DOE-2.2 (eQuest front end)?
>>
>>
>>
>>
>> John R. Aulbach, PE, CEM<?xml:namespace prefix = o ns =
>> "urn:schemas-microsoft-com:office:office" />
>>
>>
>> Senior Energy Engineer
>>
>> *Partner Energy
>> *
>> 1990 E. Grand Avenue, El Segundo, CA 90245
>> W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
>>
>> www.ptrenergy.com | jaulbach at ptrenergy.com<http://us.mc528.mail.yahoo.com/mc/compose?to=%7C%20jaulbach@ptrenergy.com>
>>
>> --- On *Wed, 10/14/09, Christopher Jones <cj at enersave.ca<http://us.mc528.mail.yahoo.com/mc/compose?to=cj@enersave.ca>
>> >* wrote:
>>
>> From: Christopher Jones <cj at enersave.ca<http://us.mc528.mail.yahoo.com/mc/compose?to=cj@enersave.ca>
>> >
>> Subject: Re: [Equest-users] Metric project.
>> To: "John Howe" <JHowe at jbace.com<http://us.mc528.mail.yahoo.com/mc/compose?to=JHowe@jbace.com>
>> >
>> Cc: equest-users at lists.onebuilding.org<http://us.mc528.mail.yahoo.com/mc/compose?to=equest-users@lists.onebuilding.org>
>> Date: Wednesday, October 14, 2009, 7:09 AM
>>
>> Equest may not be very helpful here.  You can always use EE4 - a simple
>> interface to DOE2.1e that allows full input in metric and converts to
>> imperial for running the model.  I find that EE4 will give just as accurate
>> an answer a equest for over 90% of the building simulation problems I face.
>> Get it at:
>>
>>
>> http://canmetenergy-canmetenergie.nrcan-rncan.gc.ca/eng/software_tools/ee4.html
>>
>> Note that EE4 generates the Budget Case for the MNECB but not for ASHRAE
>> 90.1.  As with equest, you will have to create your own Budget case.
>>
>>
>> At 01:25 PM 10/8/2009, John Howe wrote:
>>
>> Content-class: urn:content-classes:message
>> Content-Type: multipart/alternative;
>>          boundary="----_=_NextPart_001_01CA483C.5DDB8FD5"
>>
>>
>> I have a job that is designed entirely in metric, including the CAD files.
>> Can I do the entire model in metric?
>>
>>
>> John Howe, P.E., LEED AP
>> Project Engineer
>> jba consulting engineers
>> JBA Denver · 13772 Denver West Pkwy, Suite 200 · Lakewood, CO 80401
>> p 303.985.3260 · f 303.987.2304  · jhowe at jbace.com<http://us.mc528.mail.yahoo.com/mc/compose?to=jhowe@jbace.com>
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<http://us.mc528.mail.yahoo.com/mc/compose?to=EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG>
>>
>> >>
>> Christopher Jones, P.Eng.
>> Suite 1801, 1 Yonge Street
>> Toronto, ON M5E1W7
>> Tel. 416-203-7465
>> Fax. 416-946-1005
>> email cj at enersave.ca<http://us.mc528.mail.yahoo.com/mc/compose?to=cj@enersave.ca>
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<http://us.mc528.mail.yahoo.com/mc/compose?to=EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG>
>>
>>   >>
>> Christopher Jones, P.Eng.
>> Suite 1801, 1 Yonge Street
>> Toronto, ON M5E1W7
>> Tel. 416-203-7465
>> Fax. 416-946-1005
>> email cj at enersave.ca<http://us.mc528.mail.yahoo.com/mc/compose?to=cj@enersave.ca>
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<http://us.mc528.mail.yahoo.com/mc/compose?to=EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG>
>>
>>
>
>
>
>


-- 
Steve Mignogna
Atelier Ten
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091019/46db9ada/attachment-0002.htm>