[Equest-users] (no subject)

[Howe, Timothy]

wrong inp file.  send out the one without the "- Baseline Design" in it.
 
Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec
2060 Brighton-Henrietta Town Line Road
Rochester NY 14623-2792
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

stantec.com <http://www.stantec.com/>  
 
The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.
 
ü Please consider the environment before printing this email.
 

________________________________

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Furey, Patrick
Sent: Tuesday, September 15, 2009 3:15 PM
To: equest-users
Subject: [Equest-users] (no subject)



I'm working on a school in Chicago, 5 VAV air handlers, chiller, boilers, ER piping, a few baseboards. Someone else created the model, and I'm trying to trouble shoot it now. 

  

I've gone through a series of fixes on a few items, and now I'm to a point that my throttling hours are down within reason. The problem now is that the BEPS and Equipment reports are showing that I'm providing no cooling, and very little heating. I can't find what would be restricting these items from operating. The strange thing to me is that all the zones are behaving as if the chiller and boiler were functioning as I would expect. Any advice on how to diagnose my problem? 

  

I've checked schedules, adjusted throttling ranges, compared input files, etc. Any help would be appreciated. 

  

Pat Furey 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090915/b0533d2c/attachment-0001.htm>