[Equest-users] How to turn off hot water loop and how to make a FCU+DOAS system simulation

[tsea2005]

Hi all:
       I am simulating a building which dosen't need heating via FCU,but in eQuest's air-side system,there is the  4-pipe Fan coils with HW heat.  I don't need heating so how can i turn off the heat water loop in detailed interface mode？

     Another question is HOw to service the whole building with both FCU and DOAS?

Thank you so much!
2010-04-17 



tsea2005 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100417/ba73f4ce/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 8485 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100417/ba73f4ce/attachment.jpeg>