[Equest-users] How to turn off hot water loop and how to make a FCU+DOAS system simulation

[Grando, John]

You can just select it as it is and then remove it in Detailed edit or set the heating level to something extremely low (55F).


John Grando LEED AP| Mechanical Engineer





________________________________
From: tsea2005 [mailto:tsea2005 at 163.com]
Sent: Saturday, April 17, 2010 2:56 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How to turn off hot water loop and how to make a FCU+DOAS system simulation


Hi all:
       I am simulating a building which dosen't need heating via FCU,but in eQuest's air-side system,there is the  4-pipe Fan coils with HW heat. [cid:121205313 at 19042010-15F1]  I don't need heating so how can i turn off the heat water loop in detailed interface mode？

     Another question is HOw to service the whole building with both FCU and DOAS?

Thank you so much!
2010-04-17
________________________________
tsea2005


NOTICE OF CONFIDENTIALITY

This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof.  In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law.  If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission.  Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege.  If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100419/0433d754/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Catch0.jpg
Type: image/jpeg
Size: 8485 bytes
Desc: Catch0.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100419/0433d754/attachment-0001.jpg>