[Equest-users] SS-E or SS-R for Unmet Hours?

Pasha Korber-Gonzalez pasha.pkconsulting at gmail.com
Mon Aug 2 11:18:08 PDT 2010


Jennifer,

start with looking at both SS-F (for each zone in your model) and SS-R for
each system in your model.  You'll need to use them both simultaneously to
start understanding what your model is OR is not doing.

Pasha

On Mon, Aug 2, 2010 at 12:05 PM, Jennifer Jin
<evergreen.building at yahoo.com>wrote:

>  Hi Every one,
>
> I have a project which use heat pump for a two story office building. Which
> report should I use to get unmet hours, SS-E or SS-R?
>
> Many thanks,
>
> Jennifer
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100802/f2d6d804/attachment-0001.htm>


More information about the Equest-users mailing list