[Equest-users] SS-E or SS-R for Unmet Hours?

Jennifer Jin evergreen.building at yahoo.com
Mon Aug 2 11:24:53 PDT 2010


Pasha,

Thanks for your quick response. SS-E report provides the annual total fas run 
hours (not a zone level), will that be sufficient for a LEED submittal?

Thanks,
Jennifer




________________________________
From: Pasha Korber-Gonzalez <pasha.pkconsulting at gmail.com>
To: Jennifer Jin <evergreen.building at yahoo.com>
Cc: equest-users at lists.onebuilding.org
Sent: Mon, August 2, 2010 2:18:08 PM
Subject: Re: [Equest-users] SS-E or SS-R for Unmet Hours?


Jennifer,

start with looking at both SS-F (for each zone in your model) and SS-R for each 
system in your model.  You'll need to use them both simultaneously to start 
understanding what your model is OR is not doing.

Pasha


On Mon, Aug 2, 2010 at 12:05 PM, Jennifer Jin <evergreen.building at yahoo.com> 
wrote:

Hi Every one,
>
>I have a project which use heat pump for a two story office building. Which 
>report should I use to get unmet hours, SS-E or SS-R? 
>
>
>Many thanks,
>
>Jennifer
>
>
>
>
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to 
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100802/a2198150/attachment-0001.htm>


More information about the Equest-users mailing list