[Equest-users] eQuest Activating the Packaged Desiccant Option

John Aulbach jra_sac at yahoo.com
Tue Aug 17 13:46:51 PDT 2010


More things unpackage themselves in the Detailed Edit Mode.

Go there and see if your wishes come true....so you don't get peeved...



John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 



________________________________
From: Kathryn Kerns <kathryn.kerns at bceengineers.com>
To: equest-users at lists.onebuilding.org
Sent: Tue, August 17, 2010 1:38:49 PM
Subject: [Equest-users] eQuest Activating the Packaged Desiccant Option


Does anybody know how to activate the Packaged Desiccant option in eQuest? I 
have created some curves that I think might work and they show up as part of the 
possible selectable curves when I click on the Packaged Desiccant Tab curves 
individually, but I can't get the Design Wizard to select this curve or indeed, 
any curve from the possible list that appears. What am I missing? Some other 
part of another tab that needs to be activated? If so, where? I just assumed 
that this option worked and if I could make curves, I could use it. Maybe it 
doesn't work? If this is true, I am going to be peeved.
 
Thanks for listening.


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100817/e3a6ae2c/attachment-0001.htm>


More information about the Equest-users mailing list